Neff C77V60N2 User Manual download pdf (Page 49)

Neff C77V60N2 | 02/2012

English | 47

Informationandsettings

Usei(1) to display information (press briey)

and adjust settings (hold down for at least

three seconds).

Displayinginformation

In the Info menu (pressi briey) you can call

up the following information:

X when it is necessary to descale the

appliance

X when it is necessary to clean the

appliance

X when it is necessary to change the lter

X how much coffee has been dispensed

since the appliance was rst put into

operation

X how many milk drinks have been

dispensed

X how much hot water has been prepared

Displayingsettings

Hold downi(1) for at least 3 seconds; the

different setting options are then displayed:

Settings

Language Cup volume

English

Use Y (2) and Z (5) to switch between the

different setting options. The currently active

setting is always shown in a larger font. You

can change the setting that is currently dis-

played using the navigation button

(4).

To exit the menu, pressi(1) again.

The changes you have made are

saved automatically. It is not neces-

sary to conrm them additionally.

Thefollowingsettingoptionsareavail

abletoyou:

Language: Press the navigation button

(4)

to select the display language.

Cup volume: The per-cup quantity can be

set separately for each type of drink and

each cup size (see “Set per-cup quantity”).

Water hardness: Press the navigation but-

ton

(4) to select the required water hard-

ness (1, 2, 3 or 4) (refer also to “Checking

and setting the water hardness”).

Coffee temperature: Press the navigation

button

(4) to set the coffee temperature.

Auto off after: Press the navigation button

(4) to enter the time span after which the

appliance should automatically switch off

following the last drink preparation. A time

between 5 minutes and 8 hours can be set.

The default time is one hour, but this can be

shortened to save energy.

Contrast: The display contrast can be set

from – 4 to + 4 with the navigation button

(4). The default setting is 0.

Illumination: The lighting can be set to Off,

On (factory setting) or Off after 5 min.

Water filter: Each time a new water lter

is inserted in the water tank (8), it must be

rinsed:

1. Place the water lter in the water tank

(8)and ll the tank with water up to the

“max” mark.

2. Use the navigation button

(4) to select

Press Y and press z (6).

3. Place a container with a capacity of

0.5 litres under the milk frother (19).

4. Press z (6). Water will now run rst

through the lter to rinse it and then into

the container.

Empty the container. The appliance is ready

to use once more.

Rinsing the lter simultaneously activates

the setting for the Service - change filter

display.

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 95 96

Comments to this Manuals

No comments