Neff K8315X0 User Manual download pdf (Page 24)

en

24

Controls

Fig. 2

Switching on the

appliance

Switch on the appliance with the

On/Off button, Fig. 1/6.

The temperature display for the

refrigerator compartment, Fig. 2/4,

flashes until the appliance has reached

the set temperature.

The appliance begins to cool. Light is

switched on when the door is open.

We recommend a factory setting

of +4 °C in the refrigerator compartment.

Do not store perishable food warmer

than +4 °C.

Operating tips

■ After the appliance has been switched

on, it may take several hours until the

set temperatures have been reached.

Do not put any food in the appliance

beforehand.

■ The front sides of the housing are

partly heated slightly. This prevents

condensation in the area of the door

seal.

Setting the

temperature

Fig. 2

Refrigerator compartment

The temperature can be set from

+2 °C to +8 °C.

Keep pressing temperature setting

button on refrigerator compartment 3,

until the required refrigerator

compartment temperature is set.

The value last selected is saved. The set

temperature is indicated on the

temperature display for the refrigerator

compartment 4.

Cool-fresh compartment

The temperature in the “cool-fresh”

compartment has been set to almost

0 °C at the factory and should not be

changed if at all possible.

If frost forms on the refrigerated food,

the temperature can be increased.

(See chapter “Eliminating minor faults

yourself”.)

1 Alarm button

Used to switch off the warning

signal, see chapter “Alarm

function”.

2 “Super” button refrigerator

compartment

Switches super cooling on and

off.

3 Refrigerator compartment

temperature selection button

The button sets the temperature

in the refrigerator compartment.

4 Temperature display refrigerator

compartment

The numbers correspond

to the set refrigerator

compartment temperatures in °C.

5 ON/OFF display

The ON/OFF display is lit when

the appliance is in operation.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 83 84

Comments to this Manuals

No comments