en
28
Controls
Fig. 2
Switching on
the appliance
Switch on the appliance with the On/Off
button 2/1.
A warning signal sounds. Alarm
button 2/2 flashes.
Press the alarm button 2/2. The warning
signal switches off.
The alarm button 2/2 remains lit until
the set freezer compartment temperature
has been reached.
When the door is open, the light in the
refrigerator compartment is lit.
Note
If the light switch, Fig. 1/9, is pressed
when the door is open, the light and the
displays on the controls go out.
The factory has recommended
the following temperatures:
■ Refrigerator compartment: +4 °C
■ Freezer compartment: –18 °C
Operating tips
■ When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
■ The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
■ The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
■ If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
1 On/Off button
Serves to switch the whole
appliance on and off.
2 Alarm button
Used to switch off the warning
signal, see chapter “Alarm
function”.
3 “Super” button (freezer
compartment)
Switches super freezing
on and off.
4 Temperature selection button
freezer compartment
The button sets the temperature
in the freezer compartment.
5 Temperature display freezer
compartment
The numbers correspond
to the set freezer compartment
temperatures in °C.
6 “Super” button refrigerator
compartment
Switches super cooling on and
off.
7 Refrigerator compartment
temperature selection button
The button sets the temperature
in the refrigerator compartment.
8 Temperature display refrigerator
compartment
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
Comments to this Manuals