Neff B46C74N3GB User Manual download pdf (Page 34)

The descaling programme (duration approx. 40 minutes)

consists of the following sequences:

■ Descaling

■ 1st rinse

■ 2nd rinse

For hygiene reasons, the descaling programme must be run

through completely so that the appliance can be ready for

operation again. It cannot be interrupted using the „ Stop

button.

If the descaling process is interrupted (for example, due to a

power failure or because the appliance is switched off), you are

prompted to continue with the descaling programme after the

appliance is switched back on. The programme continues by

repeating the interrupted process (for example, 1st rinse).

Caution!

■ Damage to the appliance: Only use the descaling tablets

that are recommended by us to descale the appliance. Other

descalers may damage the appliance.

Ordering descaling tablets through after-sales service:

Product no. 310967

Ordering descaling tablets through the retail trade: Product

no. TZ60002

■ Risk of surface damage: Do not allow descaling solution to

come into contact with the control panel or other sensitive

surfaces. If this does happen, remove the descaling solution

immediately with water.

Start the descaling programme.

The descaling programme can only be started once the

cooking compartment has completely cooled down. There must

be no residual heat (

œ or •) shown in the display.

If you have cooked using steam immediately before descaling,

you must first switch the appliance off so that the residual water

is pumped out of the evaporator system.

1. Dissolve the descaling tablets in water to make a descaling

solution.

Note: Follow the manufacturer's instructions for the descaling

tablets.

2. Switch on the appliance.

3. Press and hold the Í descaling button for 3 seconds.

"Pour descaling solution into tank and press Start button" and

š†™ are displayed.

4. Fill the water tank with 400 ml of descaling solution and slide

it in fully. Dispose of the rest of the descaling solution and

rinse with water.

5. Press the ƒ Start button.

The

ƒ symbol lights up The descaling starts.

Notes

■ If the water tank has not been filled, a signal sounds and the

Descale programme does not start. Fill the water tank with

the descaling solution and slide it in fully.

■ If a signal sounds and the ƒ symbol flashes, this indicates

that the

ƒ Start button has not been pressed. Press the

ƒ Start button.

■ The clock display shows how long the Descale programme

has left to run.

1st rinse

After the descaling is complete, a signal sounds and "Empty

tank and refill with fresh water" is displayed in the text display.

1. Empty the water tank, rinse it out thoroughly and fill it with

400 ml fresh water.

2. Slide in the water tank all the way.

"1st rinse" and

§ü‚ are displayed (rinsing1 = 1st rinse). The

ƒ symbol flashes.

3. Press the ƒ Start button.

The

ƒ symbol lights up The appliance starts rinsing.

After the 1st rinse is complete, a signal sounds and "Empty

tank and refill with fresh water" is displayed in the text display.

2nd rinse

1. Empty the water tank, thoroughly rinse it and fill it with 400 ml

fresh water.

2. Slide in the water tank all the way.

"2nd rinse" and

§ü ƒ are displayed (rinsing2 = 2nd rinse). The

ƒ symbol flashes.

3. Press the ƒ Start button.

The

ƒ symbol lights up The appliance starts rinsing.

After the 2nd rinse is complete, a signal sounds and "Empty

tank and clean" and "Descaling complete" are displayed in the

text display.

Removing the remaining water

1. Empty and thoroughly rinse out the water tank.

2. Switch off the appliance.

Self-cleaning surfaces

The back wall, side walls and ceiling of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation.

The higher the set temperature and the longer the oven is in

operation, the better the cleaning result. Large splashes only

disappear after the oven has been used several times.

Residues can be removed with water and a soft sponge.

Colour variations on the self-cleaning surfaces have no effect

on the self-cleaning function.

Caution!

■ Damage to surfaces on self-cleaning areas due to applying

oven cleaner.Never clean the self-cleaning surfaces with oven

cleaner.

If oven cleaner accidentally gets onto self-cleaning surfaces,

remove it immediately with a sponge and plenty of water.

■ Damage to surfaces on self-cleaning areas due to the use of

abrasive and acidic cleaning agents and aids.

Do not use cleaning agents containing abrasive substances

or acids.

Do not use abrasive cleaning aids such as steel wool or

scourers.

Oven cleaning

The back wall, ceiling and side walls of the cooking

compartment are coated with a highly porous ceramic layer.

This coating absorbs and disintegrates splashes from baking

and roasting while the oven is in operation.

If these self-cleaning surfaces (rough surfaces) in the oven no

longer clean themselves adequately, they can be regenerated

using the

z Oven cleaning operating mode.

: Risk of burns!

The appliance becomes very hot during Oven cleaning. Keep

children away from the appliance.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 43 44

Comments to this Manuals

No comments

Neff B46C74N3GB User Manual Page 34

Comments to this Manuals

Related products and manuals for Stoves Neff B46C74N3GB