Neff D99L11N0 User Manual download pdf (Page 12)

Cleaning and care

몇 LOOKING AFTER THE APPLIANCE

Suitable cleaning agents and care products

for your appliance can be purchased via the

Hotline or from the Online Shop (see cover

page).

Appliance surfaces

NOTE: Observe the warranty regulations in

the enclosed service booklet.

 The appliance surfaces and controls are

scratch-sensitive. Therefore observe the

following cleaning instructions:

– Avoid cleaning the extractor hood with dry

cloths, abrasive sponges, scouring agents,

cleaning agents containing sand, soda,

acid, chlorine or any other aggressive

substances.

– Clean the appliance surfaces and controls

with a soft, damp cloth, washing-up liquid

or a mild window cleaner only.

– Do not scrape o dried dirt, but moisten

with a damp cloth.

– Clean carefully in the area of the controls

to avoid liquid from getting into the

electronics.

NOTE: Clean the stainless steel surfaces in

the direction of the ground surface only!

Do not use stainless steel cleaner for the

control buttons!

Looking after the appliance

 Suitable cleaning agents and care

products for your appliance can be

purchased via the Hotline or from the

Online Shop (see cover page).

Metal-mesh grease lters

 The inserted metal-mesh grease lters

absorb the grease particles from the kitchen

fumes.

 The lter mats consist of re-proof metal.

몇 RISK OF FIRE

As the lters become more saturated with

greasy residue, the ammability increases.

The function of the extractor hood may also

be impaired.

 The risk of re is prevented by cleaning

the metal-mesh grease lters in good time.

 When cleaning the grease lters, also

remove grease deposits from the accessible

parts of the housing with a damp cloth.

Cleaning the metal-mesh

grease lters ...

 Under normal operation (daily 1 to 2

hours), the metal-mesh grease lters must

be cleaned 1x month.

... in the dishwasher

 The metal-mesh grease lters can be

cleaned in the dishwasher. Slight

discolouration may occur but this will not

aect the function of the grease lters.

 The lters must be placed loosely in the

dishwasher. They must not be wedged in.

NOTE: Do not clean heavily saturated metal-

mesh grease lters together with utensils.

... by hand

 When cleaning by hand, soak the grease

lters in a hot detergent solution, brush o

the dirt, rinse thoroughly and leave to dry.

 Do not use any aggressive, acidic or

alkaline cleaning agents.

 If dirt is particularly stubborn, we

recommend using a special grease solvent

spray. This can be ordered via the Online

Shop.

Removing and installing the grease lters

 Before removing and installing the grease

lters, always follow the instructions and

warnings in the chapter entitled “Safety

instructions”!

Removing and installing the metal-mesh

grease lters

1. Open the lock and fold down the grease

lters. In doing so, hold the underside of

the grease lters with your other hand.

2. Clean the grease lters.

3. Reinsert the cleaned grease lters.

Changing the activated carbon lter

 Under normal operation (daily 1 to 2

hours) the activated carbon lters must be

replaced approximately 2x year.

 The activated carbon lter is available

from specialist outlets, customer service or

the Online Shop (see Optional accessories).

Use original lters only.

 Activated carbon lters do not contain

any pollutants. They can be disposed of in

the household refuse.

1. Remove metal-mesh grease lter.

2. Unlock ue duct on both sides and

slide downwards.

3. Remove both activated-carbon lters

forwards and replace.

4. Push ue duct upwards until it clicks

into position.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 51 52

Comments to this Manuals

No comments

Neff D99L11N0 User Manual Page 12

Comments to this Manuals

Related products and manuals for Hoods Neff D99L11N0