Neff B46C74N3GB User Manual download pdf (Page 10)

Setting the clock

Note: When you press the KJ clock function button, you have

3 seconds to set the clock using the rotary selector. Should this

have been insufficient for you, you can amend the clock time

later.

‹:‹‹ flashes in the clock display.

1. Briefly press the KJ clock function button to go to the

setting mode.

The

KJ and 3 symbols light up. ‚ƒ:‹‹ appears in the

clock display.

2. Set the current time using the rotary selector.

Your setting is accepted after 3 seconds.

Changing the clock

To subsequently change the time, press the

KJclock function

button repeatedly until the

KJ and 3 symbols light up again.

Change the time with the rotary selector.

Cleaning the appliance

Clean your appliance before using it for the first time.

1. Remove the accessories from the cooking compartment.

2. Completely remove any residual packaging (e.g. bits of

polystyrene) from the cooking compartment.

3. Clean the accessories and cooking compartment with hot

soapy water (see chapter: Cleaning and care).

4. Fill water tank with 400 ml water (see chapter: Filling and

emptying the water tank).

5. Slide in the water tank all the way.

6. Using the operating mode selector set % Top/bottom

heating (see chapter: Operating the appliance).

7. Use the temperature selector to set the temperature to

240 °C.

8. Press the Ÿ AquaAssist button repeatedly until the• ž Ÿ

symbols light up (see chapter: AquaAssist - steam-assisted

cooking).

9. Press the ƒ start button.

10.Switch off the appliance if the water tank is empty. To do

this, turn the operating mode selector back to the off position

Û and retract it.

The remaining water will be pumped out of the evaporator

system. The

Ì symbol lights up.

11.Emptying the water tank (see chapter: Filling and emptying

the water tank)

12.Afterwards, wipe the cooled cooking compartment with hot,

soapy water.

Note: Remove limescale with a cloth soaked in vinegar, then

wipe with clean water and rub dry with a soft cloth.

13.Clean the outside of the appliance with a soft, damp cloth

and soapy water.

Operating the appliance

In this section, you can read about

■ how to switch your appliance on and off

■ how to select an operating mode and temperature

■ how to fill and empty the water tank

■ when your appliance switches off automatically

Switching on the appliance

Press the operating mode selector to make it pop out.

This switches on the appliance, and it is now ready for use.

"Appliance is ready for use" and "Oven light" appear in the text

display.

Selecting operating mode and temperature

: Risk of scalding!

The water in the water tank may become very hot if you

continue to operate the appliance. Empty the water tank after

each steam-assisted application.

Notes

■ The operating modes / Slow cooking, é Steam

cooking,

ê Dough proving and z Oven cleaning can only

be started if the cooking compartment has cooled down.

There must be no residual heat shown in the temperature

display (neither

• nor œ).

■ For steam-assisted applications, you must fill the water tank

(see section: Filling and emptying the water tank)

1. Switch on the appliance.

2. Turn the operating mode selector until the desired operating

mode appears on the text display.

&LUFR7KHUP

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments

Neff B46C74N3GB User Manual Page 10

Comments to this Manuals

Related products and manuals for Stoves Neff B46C74N3GB