Neff B46C74N3GB User Manual download pdf (Page 11)

3. Turn the temperature selector to change the default

temperature.

Note: If no default temperature is displayed, the temperature

of your selected operating mode is set permanently. You

cannot change this temperature.

4. Press the ƒ Start button.

Notes

■ Depending on the operating mode that you have selected,

you will hear a pumping noise after the operation has started.

The appliance is checking whether the pumps are working

correctly.

■ If you cannot start a steam-assisted application, check

whether the water tank has been filled and fully inserted.

Changing the operating mode

1. Turn the operating mode selector until the desired operating

mode is selected.

2. Turn the temperature selector to change the temperature.

3. Press the ƒ Start button.

Current temperature

Press the

± info button. The current temperature appears for

3 seconds.

Note: The current temperature can only be displayed with

operating modes with a default temperature.

Heating indicator

The heating indicator displays the rising temperature in the

cooking compartment.

■ Temperature reached (figure A)

■ Appliance reheating (figure B)

Filling and emptying the water tank

: Risk of injury and risk of fire!

Only fill the water tank with water or with the descaling solution

that is recommended by us.

Do not pour any flammable liquids (e.g. alcoholic drinks) into

the water tank.

Due to hot surfaces, vapours from flammable liquids may catch

fire in the cooking compartment (explosion). The appliance

door may spring open. Hot steam and jets of flame may

escape.

Caution!

The appliance may become damaged due to the use of

unsuitable liquids.

Do not use distilled water, highly chlorinated tap water

(> 40 mg/l) or other liquids.

Only use cold, fresh tap water, softened water or uncarbonated

mineral water.

Notes

■ If you use mineral water, set the water hardness to hard.

■ For hygiene reasons, a reminder message will appear after

the appliance is switched off if the water tank has not been

emptied. The reminder message goes out once the water

tank is empty.

Filling the water tank

Fill the water tank before each use with steam assistance.

1. Press lightly on the centre of the lower edge of the water tank

(picture A).

2. Pull out the water tank (picture B).

3. Fill the water tank with cold water up to the "max" mark

(picture C).

4. Slide in the water tank all the way.

Operating mode Default temper-

ature in °C

Temperature

range in °C

3 CircoTherm®*

160 40 - 200

“ CircoTherm® eco

160 40 - 200

% Top/bottom heating*

170 50 - 275

0 Pizza setting*

220 50 - 275

ë Bread-baking*

200 180 - 220

$ Bottom heating

200 50 - 225

4 Circo-roasting*

170 50 - 250

+ Full-surface grill

+ Full-surface grill (inten-

sive)**

220 50 - 275

Fixed setting

( Centre-area grill

( Centre-area grill (inten-

sive)**

180 50 - 275

Fixed setting

/ Slow cooking

Fixed setting

ü ü ü

é Steam cooking

Fixed setting

¨©¨

ê Dough proving A ƒ A ‚, ƒ, „

z Oven cleaning

Fixed setting

“’†

ä Reheating

120 80 - 180

* You can activate steam for this operating mode

** Turn the temperature selector beyond 275 °C.

‚Ÿ£ appears

in the temperature display

$ %

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Comments to this Manuals

No comments

Neff B46C74N3GB User Manual Page 11

Comments to this Manuals

Related products and manuals for Stoves Neff B46C74N3GB