Neff B46C74N3GB User Manual download pdf (Page 12)

Refilling the water tank

If the water tank is empty, a signal sounds. "Fill water tank and

slide in fully" appears in the display. Steam-assisted operation

is interrupted.

1. Pull out the water tank.

2. Fill the water tank up to the "max" mark and slide it in fully.

The steam-assisted operation continues.

Emptying the water tank

Empty the water tank after each steam-assisted use of the

appliance.

1. Turn the operating mode selector back to the Û off position

and push it in.

"Pumping-out" appears in the text display and

˜ž© (pumping

out) appears in the temperature display. The remaining water

in the evaporator system is pumped back into the water tank.

After the pumping, "Pumping-out finished" appears.

2. Pull out the water tank slowly and level.

3. Remove the cover (Picture A).

4. Empty the water tank (Picture B).

5. Thoroughly dry the water tank recess and the water tank.

6. Slide in the water tank.

Switching off the appliance

: Risk of scalding!

When you open the appliance door, hot steam can escape.

Open the appliance door carefully after cooking.

Note: The appliance has a cooling fan. After the appliance is

switched off, the cooling fan may continue to run.

1. Turn the operating mode selector back to the Û off position

2. Press the operating mode selector in so that it stays in.

The appliance switches off.

Note: If the appliance is switched off after a steam-assisted

operation, you will hear a pumping sound. The appliance is

pumping the remaining water out of the evaporator system

back into the water tank. "Pumping-out" appears in the text

display. Only empty the water tank once "Pumping-out finished"

is displayed.

You can see in the temperature display whether there is high or

low residual heat in the cooking compartment.

Turning off the operation

Press and hold the

„ Stop button. The appliance turns off the

current operation. The appliance is not switched off. You can

now start a different operating mode.

Interrupting and continuing an operation (Pause)

Briefly press the

„ Stop button. The appliance interrupts the

current operation. Press the

ƒ Start button to continue the

paused operation.

After each steam-assisted use

1. Switch off the appliance.

The remaining water is pumped out of the evaporator system

and back into the water tank. "Pumping-out" appears in the

text display.

2. Only empty the water tank once "Pumping-out finished" has

been displayed.

3. Empty and wash the water tank, and leave it to dry with the lid

open.

4. Wipe the cooled cooking compartment down with a soft

cloth.

5. Remove any dirt from the cooking compartment.

Note: Remove limescale marks with a cloth soaked in

vinegar, then wipe with clean water and rub dry with a soft

cloth.

Automatic safety cut-out

The automatic safety cut-out is only activated if you have not

made any settings on your appliance for a prolonged period.

You can adjust the period of time after which your appliance

shuts off.

"Safety cut-out" appears in the text display and

‹‹‹ flashes in

the temperature display. Appliance operation is interrupted.

Turn the operating mode selector to the

Û position to

deactivate it.

Changing the basic settings

Your appliance has various basic settings, which are preset at

the factory. You can change these basic settings as required.

1. Switch on the appliance.

2. Press and hold the ± info button for 3 seconds to go to the

basic settings menu.

The text display shows "Select language: English". If the

appliance controls are locked, you must unlock them first.

3. Press the ± info button repeatedly until the current basic

setting for the relevant submenu is displayed on the text

display (e.g. "Audible signal off").

4. Using the temperature selector, set the required basic setting

within a submenu (e.g. "Audible signal 2 minutes").

5. Press and hold the ± info button for 3 seconds.

Your basic setting is saved.

Note: If nothing is entered after 15 seconds, the Basic settings

menu is automatically closed. "Appliance is ready for use"

appears in the text display.

$ %

Temperature

display

Text display Meaning

•

Residual heat

high

Residual heat high

(above 120 °C)

Residual heat

low

Residual heat low

(between 60 °C and 120 °C)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comments to this Manuals

No comments

Neff B46C74N3GB User Manual Page 12

Comments to this Manuals

Related products and manuals for Stoves Neff B46C74N3GB